We have much experience with Embedded Linux Development Services for Twelve Mile and embedded software in general. Our team has been working with UNIX and Linux since the early 1990s using primarily Novell, Redhat and Debian. We have also wrote x86-based and embedded-based kernel-space character and block device drivers; along with user-space drivers for various projects; which where mostly proprietary drivers for private companys. Some of the drivers included:
- IO such as Parallel Port, UART, RS232, RS485 (Modbus RTU/ASCII), RS422, i2c, SPI, USB, Ethernet, wireless (801.11g, 433MHz, 918MHz, XBee, etc), CAN, DAC, ADC and DIO.
- Displays such as LCD and seven-segment displays.
- Motor/actuator controllers such as open-loop and closed-loop PWM for DC/AC motors, servos, stepper motors and solenoids.
- Sensors such as analogue/digital cameras, GPS, accelerators, gyros, encoders, temperature, light, IR and Ultrasonic.
The most popular public kernel-space driver we wrote was the "poor mans closed-loop motor controller" called: Parallel Port PWM/Encoder Kernal Space Linux Driver. And our most popular public user-space driver was the USB Missile Launcher Linux Driver.
Our debugging techniques may involve gdb, valgrind, kmemcheck or simply printf, kprintf, and via DIO (e.g. LEDs or seven-segment displays).
We have extensive knowledge of the Linux command line tools (including the cut down version provided by busybox), packages available, and the inner workings of Linux itself. And have worked with numerous embedded Linux architectures such as x86 CISC, MPU ARM RISC (via OMAP, LPC, BeagleBone, Raspberry Pi and Arduino solutions), FPGA and microcontrollers (MCUs) such as STM32F4, MSP430, Atmel, PIC and LPC. Let alone using ti.com Design Tools for buck-boost converters, lowpass/highpass filters, and power management IC (PMIC)
We have been programming for over 20 years in many languages for generally Linux, BSD (e.g. Mac OSX) or Windows. However generally embedded tasks are done in C, C++, python and/or simple shell scripts using vital tools such as awk, sed, grep, telnet, ssh and netcat (among many others).
Electronics is an art our team has been working with since childhood (from building kits from Dicksmith, Tandy, and Jaycar to designing digital electronic keypads). Since then, we have maintained a constant update of knowledge and experience on the topic, since most of our projects involve either building a circuit from scatch, reviewing circuit designs, programming for target microcontrollers, and/or reworking pre-built PCB's for various needs such as bypassing/hacking solutions, or replacing broken components.
Our primary developer Luke Cole has a history as the "go to man" for many colleagues, and is well known to have "a knack for making things work". To learn more about Luke see his LinkedIn page or personal home page.
COLETEK: Your Partner for Engineering and Product Development in Twelve Mile, New South Wales, Australia
Let’s build something remarkable together.
Contact UsEmbedded Linux Development Services for Twelve Mile – Our Clients: Big Brands & Small Businesses
Embedded Linux Development Services for Twelve Mile – Amazing Customer Testimonials
COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.
Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.
I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.
We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.
COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.
I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.
I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.
As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.
As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.
We have used COLETEK on a couple of occasions and found their service to be professional and on time. We specialise in engineering and design of height safety equipment and since a lot of parts are made by casting from stainless steel we require a quick model before we proceed with the tool manufacture. COLETEK has been able to provide this quickly saving us valuable time and giving us peace of mind knowing our parts will look right when casted from stainless steel.
Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.
I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia